How the platform works
Our 360 video setup places guests on a low platform while a camera arm rotates around them to capture a short moving clip. It is a good fit for branded activations where you want a queue-friendly experience and instant QR sharing straight after the take.

What guests stand on
The platform is a circular, low-rise base designed for short video captures at expos, launches and corporate functions. Guests step onto the centre area, face outward or toward the camera start point, and hold a pose while the camera arm travels around them. The finished clip is then processed with the event artwork and made available by QR code.
Most people are comfortable on the platform because the standing area is wide and the step up is small. For expo work this matters, since foot traffic moves quickly and visitors do not want a long briefing. Our attendant handles the flow, positions guests, checks spacing and starts each take so the sequence stays neat and branded.
- Low platform height for easier step-on and step-off.
- Flat standing area for one person or a small group, depending on the setup.
- Camera arm rotates around the platform, not around the venue floor.
- Short clip duration to keep the line moving.
How the spin and capture work
The main action comes from the motor-driven camera arm. Once guests are in position the arm rotates around them at a controlled speed, recording a smooth orbit shot. The clip is then processed with effects such as slow motion, boomerang-style movement or branded overlays, depending on the event brief. The operator watches each run and adjusts pacing if guests need a second try.
Because the camera moves while guests remain mostly still, the best result comes from simple movement rather than too much jumping or turning. A hand wave, product hold, confetti moment or team pose works well. At a launch the platform can create a stronger sense of occasion; at an expo it gives visitors a memorable branded takeaway without needing a fully enclosed booth.
Sharing is quick. After processing, guests scan a QR code and open their clip on their own phone. If your activation also includes a print station, the 360 area can feed traffic toward print collection nearby, which helps keep the stand active even during busy periods.
Sizes, capacity and working limits
Platform size and guest count should match the venue and the kind of activation you are planning. A compact option suits tighter expo stands and one to two guests at a time. A larger option gives more room for dresses, product props or a small group shot, but needs a bit more clear space around it for safe operation.
Working limits matter. If too many people crowd the platform, feet end up near the edge and clips become harder to keep tidy. We would rather run fast repeats than overfill one take, this usually gives better content and fewer delays.
- Compact platform: suited to one or two adults, or a parent with a child at a private corporate family day.
- Standard platform: suited to two to four adults standing comfortably.
- Clearance zone: allow open space around the rotating arm and the guest step-off area.
- Weight distribution: guests should stand within the marked centre area, not on the edge.
- Footwear: very high heels, loose sandals or slippery soles may not be ideal.
If you expect long garments, wide promotional items or hand-carried stock, tell us in advance so we can advise on spacing and clip style. For safety, the operator may limit movement on site if outfits or props could catch the arm path.
Where it suits, and where it does not
The platform suits high-visibility spaces where people can stop, watch and join the queue without blocking access. It works especially well on expo stands with a clear front edge, launch spaces with branding behind the platform, and year-end functions where teams want short celebratory clips. Johannesburg venues are often straightforward for access, but each hall and hotel has its own rules on rigging times, trolley routes and floor protection.
It does not suit every location. Very narrow passages, soft or uneven flooring, wet outdoor lawns and heavily sloped surfaces are poor choices. If the only available spot sits right in a fire escape route or directly across a service corridor, we may suggest an open-air booth or print station instead. In coastal humidity, especially if doors stay open near the sea, electronics and prints need extra care and we may recommend indoor placement away from moisture.
- Best for expo stands with open frontage and steady foot traffic.
- Works well at launches where brand artwork is part of the frame.
- Good for year-end functions with enough room for queueing.
- Not suitable on uneven grass, gravel, ramps or unstable decking.
- Not ideal where noise or crowding makes operator instructions hard to hear.
Installation and site requirements
Before the event we need the basic site information so the setup is right first time. The platform requires a level floor, a nearby power point and enough ceiling and side clearance for the arm, lighting and safe guest flow. In venues affected by power cuts, please tell us what backup supply is available, or whether the stand has its own power support. This helps us plan without disruption.
Load-in also matters. Some venues allow direct trolley access while others need goods lifts, long carpeted runs or strict move-in windows. If your event is inside an expo hall, let us know stand size and whether neighbouring walls or hanging signs will sit close to the platform zone. A little extra detail here saves stress on the day.
- Firm, level floor surface.
- Indoor placement preferred, or sheltered outdoor cover if weather is uncertain.
- Standard power access within practical cable reach.
- Queue space so waiting guests do not block aisles.
- Access path wide enough for equipment cases and platform sections.
Care on the day and what to tell us when you enquire
Our attendant stays on site to manage operation, guest briefing and basic housekeeping around the unit. We ask organisers to keep drinks off the platform area and to avoid loose confetti underfoot unless it forms part of a planned moment. If younger guests may use the platform at a family-friendly function, tell us beforehand so we can guide use properly.
When you send your enquiry through the contact page, include the event type, town, venue if confirmed, and the time the platform needs to be live. It also helps to tell us whether you want branded overlays only, or a full branded area with backdrop, props or a nearby print station. If there are municipal or venue restrictions on noise, floor marking or cable runs mention that too please.
The more accurate the venue and branding details, the smoother the setup. We can then advise on the right platform option, likely queue flow and whether the space is better suited to 360 video or another booth format.
What our Photo Booth Hire customers say
Verified Google reviews
Questions we get asked
Can the platform be used outdoors?
Yes, if the area is sheltered, dry and level. Open lawns, uneven paving and exposed weather are usually not suitable.
How many people can stand on the platform at once?
That depends on the platform option and guest spacing. In most cases one to four adults is the practical range for safe, clean clips.
What do you need from us before the event?
Please send the event type, venue details, town, operating times, available floor space, power access and any artwork requirements through the contact page.
Also worth a look




Book a booth
Send a note through our contact form with the event, the venue and the kind of booth you have in mind, and our team will reply with options.
Open the contact form
