Choosing a spot
A good booth position makes the difference between a queue and an empty patch of floor. Use this guide to pick a spot that is easy to find, easy to use and practical for power, branding and guest flow.

Start with the traffic, not the floor plan
The best booth spot is usually where people already pause, not where there is empty space left over after everything else is booked. At expos, that often means the front edge of a stand, a corner that catches traffic from two aisles, or a position just inside the stand where visitors can step in without blocking the aisle. At launches and year-end functions, look for a natural holding area near arrival drinks, near the main room entrance, or on the route between the bar and the seating area.
If guests must hunt for the booth, usage drops. If they can see people using it from a few metres away, usage climbs quickly. People follow activity. A visible branded setup with good lighting and an attendant greeting guests will draw far more interest than a booth hidden behind décor or tucked next to service doors.
- Choose a spot visible from the main guest approach.
- Use corners and frontage where foot traffic already slows down.
- Avoid dead-end areas unless there is a strong reason guests will go there.
- Check that the queue can form without pushing into an aisle or doorway.
Match the position to the event type
Each event format has its own rhythm. At an expo, visitors move fast and make quick decisions, so the booth must be obvious from a distance and simple to enter. An open-air booth or print station works best when it sits close to the stand edge but still leaves room for staff to talk to visitors. For a product launch, guests arrive in waves, then gather around speeches or reveals. In that case, place the booth just outside the main presentation zone so it is active before and after the formal moment.
At a corporate year-end function, guests usually loosen up later in the evening. A booth near the dance floor can work well, but not so close that music drowns out the attendant or flashing lighting ruins the photos. For a 360 video platform, a little more breathing room is important because people need a clear safe entry and exit area.
- Expos: prioritise frontage, visibility and quick access.
- Launches: stay near guest gathering points, but away from the main reveal path.
- Year-end functions: choose a lively area with enough room for queues and movement.
- 360 video: allow extra space around the platform for safety and filming.
Leave enough room for the full setup
A booth is not only the camera position. You also need space for the backdrop, lighting, attendant, guest queue and sharing point. If prints are part of the activation, guests need a clear place to collect them without crossing in front of the camera. If QR sharing is being used, the exit point should be obvious so guests can scan and move on smoothly.
This is where many event layouts go wrong. A nice looking spot on a floor plan can feel cramped once cable routes, furniture and décor are in place. At venues in Johannesburg and surrounds, access routes can also tighten up fast during setup as staging, catering and AV teams all work at once. It helps to mark the booth area early and keep it protected from last minute creep.
- Allow space in front of the camera for groups to stand comfortably.
- Keep at least one side open for easy entry and exit.
- Make sure print pickup does not interfere with the shooting area.
- Check ceiling height if rigged décor, hanging signs or low bulkheads are nearby.
- Do not place the booth where venue staff must pass constantly with trolleys.
Sort out power, lighting and background clutter
Good photos need stable power and controlled light. Where possible, place the booth close to a reliable power point so cable runs stay short and tidy. In some venues power cuts or overloaded circuits can affect activations, especially when catering equipment, staging and decorative lighting are all drawing at the same time. A practical setup plan matters more than guessing on the day.
Natural light can help in some daytime spaces, but direct sun through glass can create harsh exposure changes and hot backgrounds. At indoor functions, coloured stage lights can also affect skin tones if the booth is too close to the dance floor or performance area. Clean branded backdrops work best when the area behind and around the booth is visually calm. Busy service passages, fire equipment cabinets and half-hidden storage doors will pull attention away from the branding and make photos look untidy.
- Confirm the nearest power source before finalising the spot.
- Avoid direct sunlight, bright windows and fast-changing stage lights.
- Keep cables out of guest walkways and emergency routes.
- Check the background for service doors, bins, signs and clutter.
Think about queue flow and staff visibility
The booth should feel easy to join. If guests cannot tell where the line starts, they tend to hover awkwardly or walk off. A short waiting area beside the booth works better than a line stretching straight into a main passage. At expos especially, queue direction matters because neighbouring stands also need access and venues can be strict about keeping aisles clear.
Your attendant should be visible enough to invite people in, explain how it works and keep things moving. This is one reason a booth hidden behind a pillar or tall stand element rarely performs well. Guests need to spot both the activity and the person guiding it. If props are included, position them where guests can reach them quickly without creating a scrum. Small practical choices like this keep usage steady and stop bottlenecks.
Also think about when the rush will hit. Right after registration, after a main speech, or after dinner the flow can spike very quickly, so the space must cope when a lot of people arrive at once.
Final spot check before you sign off
Before the event, do one last walk-through from a guest point of view. Start at the entrance and ask yourself: can I see the booth, can I understand it, and can I get to it without confusion? Then stand inside the proposed setup area and check what the camera will see. A good spot should support branding, guest comfort and smooth operation all at once.
If the venue offers only one possible area, small adjustments can still help. Turning the setup by a few degrees, moving it half a metre off a wall or shifting the queue side can make a big difference. It sounds minor but it often sorts the whole thing out.
- Walk the route from guest arrival to the booth.
- Check sightlines from at least two main approach angles.
- Confirm power, cable path and setup access times.
- Make sure the queue does not block an aisle, bar, entrance or emergency exit.
- Review lighting conditions at the actual time the booth will operate.
- Leave enough space for the attendant to work comfortably.
If you are unsure, send your floor plan and a few venue photos through the enquiry form on our contact page. We can advise on a practical position for an open-air booth, 360 video platform or print station based on the type of event and the available space.
What our Photo Booth Hire customers say
Verified Google reviews
Questions we get asked
How close should the booth be to the entrance?
Close enough to be seen easily, but not so close that it causes a jam at registration or the main doorway. Guests need room to arrive, orientate themselves and then step into the booth area comfortably.
Can the booth go outside?
It can, depending on the surface, weather cover, power and light. Wind, glare and uneven ground can affect both photo quality and safe operation, especially for a 360 platform.
What if the venue gives us very little space?
A smaller footprint can still work if the booth is placed where people naturally pass and pause. We will usually suggest a simpler layout, tighter queue plan and a clean background so the area does not feel cramped.
Also worth a look




Book a booth
Send a note through our contact form with the event, the venue and the kind of booth you have in mind, and our team will reply with options.
Open the contact form
